å
Carefully stand your unit upright.
å
Fasten the LEFT DOOR (Q) to the LEFT END (B2). Use six BLACK
9/16" LARGE HEAD SCREWS (1S).
å
NOTE: To make adjustments to the DOORS, loosen the SCREWS in
the HINGES, make needed adjustments, and tighten the SCREWS.
å
Fasten a KNOB (93K) to the LEFT DOOR (Q). Use a BLACK 1-1/4"
FLAT HEAD SCREW (7S).
å
Fasten a LOUVER MOLDING (X) to the LEFT DOOR (Q). Use three
SILVER 3/4" FLAT HEAD SCREWS (111S).
å
NOTE: Be sure the indicated hole in the LOUVER MOLDING is
positioned toward the top of the DOOR.
å
Repeat this step for the RIGHT DOOR (P).
Step 12
401322
www.sauder.com/services
Page 17
BLACK 9/16" LARGE HEAD SCREW
(12 used for the HINGES)
1S
BLACK 1-1/4" FLAT HEAD SCREW
(2 used for the KNOBS)
7S
Q
B2
X
93K
SILVER 3/4" FLAT HEAD SCREW
(6 used for the LOUVER MOLDINGS)
111S
This hole in the LOUVER MOLDING (X) must
be postioned toward the top of each DOOR.
Want options? Customize
your item with add-on
hardware kits available
on sauder.com.
