å
Place the ROD (W) onto the ROD HANGERS on the
RIGHT END (A2) and LEFT END (B2).
å
To insert the drawers into your unit, tip the front of the
drawer down and drop the glides on the drawer behind
the glides on the unit. Lift the front of the drawer up and
slide it into the unit.
å
Apply the TV WARNING LABEL (1L) onto the TV
SHELF (E). You should be able to read the label when the
TV is removed from the unit. When the TV is installed, it
should hide the label. Peel off the backing and affi
x the
label as shown in the diagram.
å
NOTE: This is a permanent label intended to last for the
life of the product. Once applied, do not try to remove it.
Step 16
401322
www.sauder.com/services
Page 21
WARNING
Never use this furniture with a TV that is too
large or too heavy. Severe injury or death can
occur. The TV and furniture will be unstable
and may tip.
- The TV
must
weigh less than
50 lbs.
- The base of the TV
must
be able to sit
completely on this shelf.
B2
A2
E
W
1L
No load
40 lbs.
I2
J2
Place the glide on the SLIDE
behind the glide on the RAIL.
