7
Assembly
2. Place the Powerhead on the floor and gently insert the telescopic
tube into the Powerhead. Push until it clicks into place.
1. Gently insert the handle into the telescopic tube and push until it
clicks into place.
Connecting Flexible Hose
Connecting Handle and Rod
Note: Ensure that the Powerhead switch located on the handle is in the “Off” position
before fitting the handle to the rod. When not using the Powerhead, ensure that the
Powerhead On/Off Button is in the “Off” position.
Before Y
ou Begin & Assembly
IMPORTANT! Always remove the power plug from the power
supply before fitting or removing accessories!
LIVE PARTS within the hose, rod and Powerhead.
Fitting:
Insert the flexible hose into the hose inlet of the vacuum. Press until it
clicks into position.
Removing:
Press the two buttons and gently pull to release the flexible hose.
