16
Replacing the Powerhead Drive Belt & Rotating Brush
WARNING: To reduce the risk of electric shock, ensure that the
power is switched off and the power plug is disconnected from
the power supply before performing any cleaning, maintenance
or troubleshooting checks. Failure to do so may result in electric
shock or personal injury.
CAUTION! The Powerhead, hose and rod contains electrical
connections. The Powerhead, hose and rod are not serviceable
parts. Please return the product to your nearest Godfreys store if
the Powerhead, hose and/or rod are faulty.
Depending on how much your vacuum is used, the motorised Powerhead
drive belt will occasionally require changing.
1. Disconnect the Powerhead from the telescopic tube.
Cleaning the Rotating Brush
WARNING! Ensure that the cleaner is disconnected from the power supply and the
Powerhead is disconnected from the rod before performing any maintenance.
Note: The Rotating Brush must be free of debris for effective
cleaning and for maximum suction.
1. Disconnect the motorised Powerhead from the vacuum rod and turn it
over to inspect the Rotating Brush.
2. If a build-up of debris is wound around the Rotating Brush, remove by
carefully cutting with scissors. Avoid damaging or cutting
the bristles.
