Saturn ST-WM0622, Manual

Page: 7 / 33

12
Anti-Bac 129 95 2 800 • • •
Quick 15 2 800 • • •
Spin 11 0 800 •
Rinse+
Spin 16 1 800 • • •
38 2 600 • • •
Wool 56 40 2 600 • • •
Kids wear 119 60 4 800 • • • •
39 2 800 • •
• •
Synthetic 49 40 2 800 • •
• •
Form 1
Note: The running time above is only for reference. The running time is different
because of different laundries and weights. The “
” means the temperature of
water is normal. "Economy" and "Rinse+" they can not be selected together.
How to use washer
Before washing clothes for the first time, you must run a complete cycle without
clothes. To do this:
1. Connect the power and turn on the tap.
2. Turn the knob to position “30”.
3. Press “Start/pause”.
It can remove the water, which is left in the tub because of manufacturer's
checking out.
Washing preparation
1. Connect the inlet hoses well and turn on the tap.
2. After making sure the power socket is grounded reliably, insert the power plug into
the power socket.
3. Place the drain hose well.
Preparation of clothes
1. Sort the laundry by color and by care label. Most garments have a textile care label
in the collar or side seam.
2. Make sure all the pockets are empty. Foreign objects (e.g. nails, coins, paper clips,
etc.) can cause damage to garments and components in the machine.
3. Close any zips, fasten hooks and eyes etc. before washing.
4. Dark textiles often contain excess dye and should be washed separately several
times before being included in a mixed load. Always wash whites and coloureds
13
separately.
5. Badly soiled areas, stains etc. should be pre-treated with liquid detergent, stain
removers, etc.
6. Turn over the clothes, which pill easily and is with woolen surface, before putting
them into the machine.
Put clothes into the washer
Unfold the laundry and bad loosely in the drum. Mixing both large and small items
gives better wash results and also helps distribute the load evenly during spinning. The
most efficient use of energy and water is achieved, when a full load is washed.
However, do not overload as this causes creases and reduces cleaning efficiency.
Make sure that no garments are caught between the door and the seal.
Using the detergent drawer
1. Open the drawer and add adequate detergent into main wash compartment marked
or
2. Add the fabric softener into compartment marked or . Do not exceed
the maximum level mark.
3. Add the detergent into the pre-wash compartment or according to the
program you select.