Saturn ST-FP7072, Manual

Page: 8 / 47

7
If you are not satisfied with
the result, switch off the appliance and
stir the ingredients with a spatula.
Remove some of the contents to
process a smaller quantity or add
some liquid.
1. Turn the blade unit on the
blender jar.
2.
Place the blender jar on the
motor unit and turn it clockwise to fix
it.
3.
Put the ingredients in the
blender jar within the maximum level
indication.
4.
Place the lid on the blender
jar, and then turn it clockwise to fix it.
5.
Connect the power plug to
the power supply.
6.
Select the speed 2.
7. After use, turn the speed
selector to 0, and unplug the
appliance.
If ingredients stick to the wall of the
blender jar:
1.
Switch off the appliance and
unplug it.
2. Open the lid and use a
spatula remove the ingredients from
the wall of the jar.
3.
Keep the spatula at a safe
distance of approx.2cm from the
blade.
FILTER
With the filter you can make delicious
fresh fruit juices, cocktails or soy milk.
The filter prevents pips and skins from
ending up in your drink.
Never overload the filter. Do not put
more
than 75g of soy beans
(unsoaked weight) or 160g of fruit in
the filter at the same time.
Using the filter
1. Mount the blender jar with
the blade unit attached on the motor
unit. Turn the blender jar clockwise to
fix it.
2.
Put the filter in the blender
jar. Make sure that the grooves of the
filter fit exactly onto the ribs inside the
blender jar.
3.
Put the mains plug in the wall
socket.
4.
Place the lid on the blender
jar.
5.
Put the ingredients in the
filter.
6. Pour water or another liquid
(milk, juice, etc.) into the blender jar.
7.
Insert the measuring cup into
the hole in the lid.
8.
Let the appliance run for
approx. 40 seconds.
9. Switch off the appliance and
remove the blender jar with the blade
unit attached from the motor unit.
Do not remove the lid. Leave the
measuring cup and the filter in the jar.
10. Pour out the drink through
the pouring lip of the blender jar.
Tip: For optimal results, put the jar
with the remaining ingredients back
onto the appliance and let it run for a
few more seconds.
Note: When you process a large
quantity, we advise you not to put all
the ingredients in the filter at the
same time. Start to process a small
quantity and let the appliance run for
a few seconds. Then switch off the
appliance and add another small
quantity. Repeat this procedure until
you
have processed all the
ingredients. Always keep the lid on the
blender jar during processing.
11.
Clean all removable parts
immediately after use (see chapter
‘юleaning’дй
CLEANING AND STORAGE
Before you clean the
appliance, unplug it.
Make sure that the cutting
edges of the blades, and discs do not
come into contact with hard objects.
This may cause the blade to get blunt.
The cutting edges are sharp.
Be careful when you clean.
1.
Clean the motor unit with a
moist cloth.