Saturn ST-FP7072, Manual

Page: 6 / 47

5
3. Put the ingredients in the
bowl.
4.
Put the lid on the bowl, and
then turn the lid clockwise to fix it.
When the lid is assembled correctly,
you hear a click.
5.
Put the pusher into the
feeding tube.
6.
Connect the power plug to
the power supply.
7.
Select the speed 1.
8. After use, turn the speed
selector to 0, and then unplug the
appliance.
Tip: When you chop onions, turn the
speed selector to P a few times to
prevent the onions from becoming too
finely chopped.
If food sticks to the blade or to the
inside of the bowl:
1. Switch off the appliance.
2. Remove the lid from the
bowl.
3.
Remove the ingredients from
the blade or from the wall of the bowl
with a spatula.
DISCS
Before you start, make sure you pick
your desired disc and assemble
according to Fig.2.
Reversible slicing/shredding disc (fine)
Reversible slicing/shredding disc
(coarse)
French fry disc
Granulating disc
Never use the disc to process
hard ingredients, like ice cubes.
Do not exert too much
pressure on the pusher when you
press ingredients down the feed tube.
Pre-cut large ingredients to
make them fit into the feed tube.
When you shred or granulate
soft ingredients, use a low speed to
prevent the ingredients from turning
into a puree.
1.
Put the tool holder on the
motor unit, turn the bowl clockwise to
fix it on the motor unit.
2.
Put the disc on the tool
holder.
3.
Put the lid on the bowl, and
then turn the lid clockwise to fix it.
4.
Put the ingredients into the
feeding tube with the pusher. Fill the
feeding tube evenly for the best
result. When you have to process a
large amount of ingredients, process
small batches and empty the bowl
between batches.
5.
Connect the power plug to
the power supply.
6.
Select the speed to switch the
appliance.