SATO FX3-LX, Driver Manual

Page: 77 / 100

77
Type
[Empty]
Do not use custom commands.
[File]
Load a custom command from the specified file.
[Text]
Enter the custom command directly into the [Contents] field.
[Parsed text]
Enter the custom command directly into the [Contents] field. You can enter control text as a
substitute entry.
[Parsed file]
Load a custom command from the specified file. You can enter control text into the file as a
substitute entry.
Note:
When printing a print layout created in an application (when outputting as a SBPL command), the custom
command is inserted into each position according to the custom command insertion position setting in the printer
driver.
The below figures show the print layout in an application and the custom command insertion position when the
print settings are used.

"Test" in the print layout is set to "SATO X24" device font (the SBPL command is <X24>).

The number of copies is set to [3].