20
Preparing the IR Camera
Setting the date and time
You need to set the Data / Time when the IR camera is turned on for the
first time.
1
Make sure that the IR camera is in null mode.(p.19)
2
Press the
MENU/ENTER
key then
press the
UP
or
DOWN
arrow on
the omni selector to select the
[System Setup] menu.
3
Press the
UP
or
DOWN
arrow on the
omni selector to select [Date & Time]
then press the
MENU/ENTER
key.
4
Setting Date and Time
•
Press the
UP
or
DOWN
arrow on
the omni selector to select anitem
to change.
•
Press the
LEFT
or
RIGHT
arrow on
the omni selector to set the values.
5
After adjusting the settings, press the
MENU/ ENTER
key to
save changes, or press the
C
key to go back to upper menu
without saving.
www.
GlobalTestSupply
.com
Quality SATIR Products Online at:
