Network Video Recorder
User Manual
Network Video Recorder
23
6.2.4. Net Channel
[Channel] Select the desired channel.
[Compression] H.264
[Resolution] The resolution of main stream can be D1 or CIF. Different channels correspond to different reso-
lutions. Frame rate setting range is also different. The channel extension stream resolution can support CIF /
QCIF.
Frame Rate : P system: a / s -25 frames / sec.
N system: a / s -30 frames / sec.
Note
：
Resolution and frame rate are vary depending on DVR model.
[Bit Rate] Constant Bit rate or Variable Bitrates. Bit rate can be set in Constant Bit rate. There are 6 levels for
image quality in Variable Bit rate, 6 is the best but it is fixed in Constant Bit rate.
[Audio] Choose channels record sound or not.
6.2.3 Snapshot
[Channel] Select a channel.
[Mode] Trigger: Crawl images when alarm.
[Image Size] CIF capture
[Image Quality] There are 6 levels of quality.
[Snapshot frequency] set highest capture rate for single
channel
，
1s/pc 2s/pc 3s/pc 4s/pc 5s/pc 6s/pc 7s/pc 8s/pc.
First, open the enable switch.
[Channel] Select the desired channel.
[Protocol] Choose a protocol supported by IPCs.
[Address IP] Input the IP of the IPC.
[Port] Input the port of the IPC.
[User name] Input the user name of the IPC.
[Password] Input the password of the IPC.
[Detect] After completing of the above settings, click the
detection button. The dev ice will connect with the IPC and
return the connection status.
[Search] Select a appropriate protocol and search. Double
click the search results, and then the device will automati-
cally be added and return to the network channel interface.
You need to fill in the user name and the password.
