8 VERSA-KWRL2
SATEL
Quick arming – Partition 1
[Part.1 QuickArm] – if this option is enabled, quick arming
(without user authorization) of the partition 1 is possible. The quick arming is not possible,
if the “Grade 2” option is enabled in the control panel.
Quick arming – Partition 2
Part.2 QuickArm] – if this option is enabled, quick arming
(without user authorization) of the partition 2 is possible. The quick arming is not possible,
if the “Grade 2” option is enabled in the control panel.
Keys sound
– with this option enabled, pressing the keypad keys is confirmed by beeps.
Sign. trbl in part. arm
[Trbl.in part.arm] – if this option is enabled, the
LED goes off after
both partitions are fully armed (if the option is disabled, the LED goes off after just one of
the partitions is armed in any mode).
Fig. 4. DLOADX
program: keypad settings stored in the control panel.
Show code entering
[Code entry ind.] – if this option is enabled, entering the code is
presented on the keypad display by asterisks.
Chime on/off
– if this option is enabled, the chime signal can be enabled/disabled by means
of the
key (the key is to be pressed for about 3 seconds).
Quick control
– if this option is enabled, the users can control the outputs by using the
number keys. When programming the control panel, the “15. Controlled” outputs must be
assigned to the keys (refer to the control panel programming manual).
Sign. new trouble
[New trbl.signal.] – if this option is enabled, the keypad audibly signals
occurrence of any new trouble (additionally, the “Trouble memory until review” option must
