6
KNX-BSA12L
• KNX-BSA12H
SATEL
1. Mount the module on the mounting rail.
2. Connect the blind/shutter motors and power cables to the connection terminals as
indicated on the enclosure.
All connections should be made as recommended in section “Wiring diagram”.
3. Use the connection terminal to connect the KNX bus cable to the module.
4. Connect a computer running ETS program to the KNX bus and configure the module.
To configure the module, you will require a computer running the ETS program version
5.5 or newer, provided with USB or Ethernet (TCP/IP) connector. The SATEL ETS
application file, which can be downloaded from www.satel.eu/ets, must be imported
into the program.
For detailed information on how to configure th
e module, refer to section “Configuring the
3.1 Wiring diagram
4. Configuring the module
Working parameters of the module are defined in the ETS program (version 5.5 or higher).
The tabs for defining individual parameters are built dynamically when working with the
program. Further parameters may be displayed in the tabs or further tabs may be displayed.
Moving the cursor over the parameter will display a tooltip with default value or value range
for that parameter.
The module has two groups of configuration parameters. The first of them includes global
parameters, which define general functionality of the module and have no direct impact on
individual channels (see “Configuring global parameters”). The other group includes channel
