2
KNX-BSA12L
• KNX-BSA12H
SATEL
The KNX-BSA12L and KNX-BSA12H are KNX blind/shutter actuators that allow you to
control the movement of sun protection products such as horizontal (Venetian) blinds, vertical
blinds, roller shutters and awnings. They also enable control of the movement of electrically-
operated windows. The KNX-BSA12L module is designed to control devices having the
24 VDC motor. The KNX-BSA12H module instead can control devices equipped with the
230 VAC motor.
The KNX-BSA12L and KNX-BSA12H modules have two physical outputs with two
corresponding logic channels. Each channel allows control of one selected type of
blind/shutter or window. Operating parameters of the channels are configured in the
ETS program in the same way for both modules, except for defining operation of the
vertical blinds, as only the KNX-BSA12L module supports this blinds.
1. Features
Communication with the KNX bus via integrated bus connector.
Feedback information about the state of module and individual channels.
Selectable type of blind/shutter for each channel.
Automatic detection of blind/shutter travel time and slat adjustment time.
Weather alarms (rain, wind, frost).
Position forcing function.
Ability to call scenes for each channel by using 1- and 8-bit commands.
Detection of blind/shutter errors (no power, incorrect position, mechanical jam, motor
overheating).
Manual control of blind/shutter travel by using buttons on the enclosure.
LEDs to indicate status of each channel / blind/shutter.
Ability to be mounted on DIN rail (35 mm).
Module configuration by using ETS program.
2. Description
