GSM-4S SATEL
47
−
Any number:
option OFF
−
Signal testing:
option chosen
−
Permanent prefix:
"602", "501", "39"
−
Prefix to erase:
"0"
−
Prefix to add:
"58"
−
Telephone numbers: "581110011", "582220022", "583330033", "602440440",
"501550550", 39778899"
The remaining prefixes and numbers should be blank.
Example 2:
– the module is connected to a PBX (private branch exchange), which has access to two
subscriber lines (public telephone exchange lines) in Gdansk (area code – 58) after
dialing the "outgoing numbers" 71 or 72; in addition, PBX has access to the trunk line
KOMERTEL (code number – 39) after dialing the number 73.
– the calls via the module are to be allowed only to the following telephone numbers:
– 111-00-11
– Security Dept.
– 222-00-22
– Administration Dept.
– 333-00-33
– residence telephone number of the owner
– 0-602 440-440
– cellular telephone number of the owner
– 0-501 550-550
– telephone number of the owner’s partner
– 0-39 77-88-99
– telephone number of the Service
While programming (at the alarm control panel) the telephone numbers for messaging, it is
required to choose one of three ways of getting connection (the letter "D" indicates the mark
of waiting for continuous dial tone):
"71D1110011"
or
"72D1110011"
or
"73D581110011"
"71D2220022"
or
"72D2220022"
or
"73D582220022"
"71D3330033"
or
"72D3330033"
or
"73D583330033"
"71D0D602440440" or "72D0D602440440" or "73D602440440"
"71D0D501550550" or "72D0D501550550" or "73D501550550"
The service can be rung up by dialing the following number:
"71DoD39778899"
or
"72D0D39778899"
or
"73D39778899"
In this case, the module is programmed as follows (items not shown below should be blank):
– Any numbers –
option not chosen
– Signal testing –
option chosen
– Outgoing No. –
"71", "72", "73"
– Permanent prefixes –
"602", "501", "39"
– Prefix to erase –
"0"
–Prefix to add –
"58"
–Telephone numbers– "581110011", "582220022", "583330033", "602440440",
"501550550", "39778899"
Example 3:
– programming to enable the module to send SMS message to cellular telephone number:
602123123
Programming the module is as follows (items shown should be programmed):
– Pager Tel. No. –
1111