SATEL ASP-100
3
1
Two sound frequencies (1450 Hz/2000 Hz) alternating within 1 second
2
Sound with rising frequency (from 1450 Hz to 2000 Hz) within 1 second
3
Sound with smoothly rising and falling frequency (1450 Hz – 2000 Hz –
1450 Hz) within 1 second
4
Sound with falling frequency (from 2000 Hz to 1450 Hz) within 1 second
Table 1. Tone types for acoustic signaling.
Power supply
The siren is powered from a 3.6 V lithium thionyl chloride battery. It is a high-current battery,
characterized by high capacity. The battery is offered by SATEL.
Given the specific nature of the battery, it must be properly initialized to reach the required
performance. The battery initialization procedure starts automatically after first-time
connection of the battery. During battery replacement, follow the procedure described at the
end of this manual to initialize a new battery.
When initializing a battery, the leftmost LED on the siren is blinking every second. The siren will not
be ready for operation until the battery initialization procedure is completed.
The siren informs about low battery.
Periodic transmissions
Every 15 minutes, the siren sends a transmission with information on the current status of the tamper
switch and battery. Periodic transmissions are used to monitor presence and operation of the siren.
Note: If any value different from 0 is programmed for the
F
ILTER
parameter for the ASP-100 siren,
the lack of presence will be reported if no transmission from the detector is received within one
hour.
Enclosure base
Explanations for Fig. 2:
mounting hole.
tamper mounting hole.
