2 ASP-100
SATEL
3. Description
Explanations for Fig. 1:
enclosure cover.
enclosure base.
battery.
piezoelectric transducer.
antenna.
Never shorten or deform the antenna.
tamper switch (tamper alarm triggered if open).
battery connector.
electronics module.
cover locking screws.
Triggering the alarm signaling
The alarm signaling is triggered:
on receiving a radio command from the controller – optical and acoustic signaling are controlled
independently,
on opening the tamper switch – both optical and acoustic signaling is triggered. Opening the
tamper switch will not trigger the alarm in the following cases:
for 10 minutes after connecting the battery,
when the control panel is running in service mode (a few seconds delay may occur between
entering the service mode and blocking the tamper signaling)
When the tamper signaling is blocked, the leftmost LED is blinking every 3 seconds.
Duration of the signaling and type of the acoustic signaling are remotely programmable.
