Series 3100
PP3123-03-0101
Automatic Burst Test Systems
User’s Guide
SATEC PIPE & PRESSURE
22
Eurotherm Controller
Below is a general overview of the Eurotherm controller’s basic operating features
that are used with this system. For more detailed information, refer to the
supplied Eurotherm manual.
Figure 3: Eurotherm front panel layout.
Upper and Lower
Readouts:
The upper readout (1,
Figure 3
) displays the current
specimen pressure, as sensed by the pressure transducer
in the return line from the specimen, in psi. The lower
readout (2) displays the setpoint in psi.
Auto/Manual Button
and Indicators:
When pressed, the AUTO/MAN button (3) toggles the
controller between automatic and manual modes. The
appropriate indicator (
AUTO
or
MAN
) will light to
show the current mode. This system should always be
operated in the automatic mode.
Page Button:
Press this button (4) to select a new list of parameters.
Scroll Button:
Press this button (5) to select a new parameter in a list.
Down Button:
Press this button (6) to decrease a value in the lower
readout (2).
Up Button:
Press this button (7) to increase a value in the lower
readout (2).
3
4
5
6
7
1
2
1.
Upper Display
2.
Lower Display
3.
Auto/Manual Button
and Indicators
4.
Page Button
5.
Scroll Button
6.
Down Button
7.
Up Button
