Satcube Ku User Manual v2.0-2019
SATCUBE PROPRIETARY
•
SATELLITE NAME:
Enter the name of the satellite.
•
LONGITUDE:
Enter the satellite’s unique longitude.
•
DOWNLINK POLARIZATION:
Select the correct polarization for the selected satellite.
•
POLARIZATION OFFSET:
Enter a polarization offset in degrees if the selected satellite has its
polarization axis outside of the geostationary arch.
•
LNB/BUC LO FREQUENCY:
Enter the frequencies appropriate for the selected satellite. LNB is
used for receive/BUC is used in the transmit.
•
RF DETECTOR FREQUENCY:
A known carrier frequency to identify the selected satellite. This
is the L-band frequency given in kHz.
•
RF DETECTOR GAIN:
Enter a value where the gain is increased if the selected carrier is weak.
•
RF DETECTOR BANDWIDTH:
Carrier bandwidth should be entered in kHz. This enables the
sensor to make a relative measurement of carrier strength to noise floor. If 0 is entered a
point measurement of the absolute carrier power will be taken.
•
SAVE
: Clicking SAVE stores the current settings and uploads the profile to the terminal.
Figure 33 Page for editing preset satellite profiles in the GUI, which can then be accessed in the terminal display.
Summary of Contents for Ku
Page 1: ...Satcube Ku User Manual ...
