Printed on 26/04/12 15/15 U514986-e Revision 4
6.3.3. Transmission device AB40
The worm screw and gear (1 & 2) :
- Check clearance
- Clean and grease
Bearings (4 & 5) on shaft (3) :
- Check wear
- Clean and grease
In the upper part of the AB40 :
- Check the rings and the drive gear shaft leading to the mechanical indicating device
- Clean and grease the drive gears assembly
N.B : The AB35 adjustment device does not require preventive maintenance.
notice very important
6.3.4. REMARK VERY IMPORTANT
We strongly advise against the use of a high pressure water jet to clean the measuring unit,
as this could seriously damage the metering unit.
