SATALARM SA-612P, User Manual, Page: 6 / 42

SATALARM SA-612 & SA-816 installer manual ver 1.1
-
PGM activation/deactivation by PC (only for PGM outputs defined as “mono-stable”, “bi-stable” or “clock timer”
types);
-
Online display of the system/partitions status and troubles ;
-
Real-time, online display of the bypassed, alarmed or open zones .
• Programmable callback function with up to 3 attempts, automatic or manually activation (manually activation may be
performed by master user or installer);
• 800-events LOG upload with display and save possibility and optionally reported to CS;
• Option of automatic answer to PC calls, either after “double call” or after programmable number of rings;
• Manual activation of communication with PC (PC upload/download acceptance), performed by master user or installer;
• Cancellation of PC to panel communication performed by master user or installer.
Zones
• 6/8 fully programmable zones on the main board, expandable to 12/16 zones using zone doubling feature or keypads’ zones ,
with single or double EOL resistor, NO/NC contacts, tamper recognition and programmable as delayed, instant, follower, 24
hour burglary, fire, tamper, panic, medical emergency, arming/disarming (“keyswitch” or “stay keyswitch”) or guardian round
type;
• SATALARM SA-816Pw give installer the option of choosing how many of the 16 zones controlled by panel are wireless.
Any combination of wired and/or wireless up to 16 zones can be done.
• 17 zone attributes, individually programmable as “ audible/silent alarm ”, “ steady/pulsing siren ”, “ manual bypassing ”, “auto
shutdown”, “ forced arming ”, “chime function activating ”, “ stay ”, “ intellizone ”, “ sensor under test ”, as well as individually
selectable zone response time ;
• “Zone bypassing” ( automatic “from swinger shut-down” or caused by home arming, if the zones have the “stay” attribute
activated - and manually by the users);
• 2 real partitions which can be armed/disarmed independently from each other – allowed by user rights;
• Individually programmable exit and entry delay times for each partition – allowed by programming;
• Programmable alarm type: silent or audible and for audible alarms steady or pulsing;
• Individual siren timers for burglary and fire alarms;
PGM functions
• 2 programmable outputs (PGMs) on the main board, expandable to 8 PGMs using other modules, each with 36 options, such
as: “ Panic alarm latch ” , “ Fire alarm latch ” , “ Medical emergency alarm latch ” , “ Latch on tamper alarm ” , “ Any alarm latch ” ,
“Pulsing siren ” , “Steady siren ” , “silent alarm” latch , “ Follow system status ” (ON while system is armed / OFF while system is
disarmed) , “ Entry delay ” , “ Exit delay ” , “ System troubles ” , “ Clock timer ” , “ Warning/confirmation pulses ” , “ Pulse after exit
delay ” , “ Pulse on arming ” , “ Pulse on disarming ” , “ Courtesy light ” , “ Pulse on siren troubles ” , “ Retriggerable mono-stable ” ,
“ Resetable mono-stable ” , “ Bi-stable ” and “ Pulse on alarm triggered by each 1 to 12/16 zones ”;
Monitoring of system troubles
• Battery Voltage and AC power monitoring ;
• Siren monitoring (upon disconnection, short circuit or overload);
• “AUX overload” monitoring ;
• Option of telephone line monitoring (TLM).
Voice messages (synthesis sounds) Communicator
• Capability of response to the remote calls for system status interrogation (the system status -armed/disarmed/alarm/”AC
power loss” – will be reported by specific voice messages or by specific synthesis sounds);