SATALARM SA-612P, User Manual, Page: 10 / 42

SATALARM SA-612 & SA-816 installer manual ver 1.1
SYSTEM LED
A) While the system is:

Totally armed in away mode – OFF ;

At least one partition is armed in stay mode ;
Blinking in case there are recorded alarms during that stay armed period and/or there are troubles in the
system (“AC power loss”, “low battery voltage”, “fail to communicate event”, “BELL trouble”, “phone line
trouble” or “system date and hour loss”)

Only for KP-164P and KP16LCDLB (SYSTEM LED is also used for the BYPASS LED functions):
o
ON – if there is at least one zone manually bypassed by user and/or at least one interior zone bypassed by
control panel;
o
Alternate 3 seconds OFF, 3 seconds blinking – if both conditions are present, system troubles and/or
registered alarm events and bypassed zones.

During any exit time – Blinking in case there are troubles in the system.
B) While the system is partially armed:

Blinking – in case there are recorded alarms (during the previous armed period or during present disarmed period
for 24h zones) or there are troubles in the system (“AC power loss”, “low battery voltage”, “fail to communicate
event”, “BELL trouble”, “phone line trouble” or “system date and hour loss”);

Only for KP-164P and KP16LCDLB (SYSTEM LED is also used for the BYPASS LED functions):
o
ON – if there is at least one zone manually bypassed by user and/or at least one interior zone bypassed by
control panel;
o
Alternate 3 seconds OFF, 3 seconds blinking – if both conditions are present, system troubles and/or
registered alarm events and bypassed zones.
C) While the system is totally disarmed:

Blinking – when the user is being within one of the next menus: Zone bypassing, System trouble displaying, Alarm
memory displaying or Program/Modify of the user codes, “follow-me” phone numbers or system date and hour;

Blinking – while the installer or master user is being within programming menu of the system parameters.
BYPASS LED (don’t apply for KP-164P and KP16LCDLB)
ON – there is at least one user-bypassed zone in the system or during stay arming mode – in case at least one zone has the
attribute „stay” enabled.
The LED will turn OFF upon system disarming or if the users unbypass all zones.
ARMED A LED
a) While the system / partition A is armed:

ON – if the system / partition A is regularly armed;

Fast Blinking – if the system / partition A is armed in “instant stay mode”.

Slow Blinking – if the system / partition A is armed in “stay mode”.
b) While the system / partition A is disarmed:

OFF

ON – while the master user is being within master user’s menu of program/modify the user codes, “follow-me”
phone numbers or system date and hour;

ON - while the installer or master user is being within programming menu of the system parameters.
ARMED B LED
a) While the partition B is armed:

ON – if the partition B is totally armed;