SATALARM SA-612 & SA-816 installer manual ver 1.1
5.
Any PGM1 to PGM8 outputs, defined as “clock timer” type set, upon entering new start/stop command of PGM activation period, will change the PGM status
from activated to deactivated and vice-versa, depending if the respective PGM activation period was previously started or stopped. The PGM1 to PGM8
output will change again their status when the system clock is identical with the time established in corresponding sections from [081] to [086].
After entering the last digit of a valid user code within this sequence
(
[*][9][User Code]
) the keypad buzzer will sound 3
confirmation beeps,
passing to display PGM1 to PGM8 status
, as follows:
While the system is being within
displaying of PGM1 to PGM8 status, the keypad LEDs’
status will be as follows:
ARMED A LED
ON
SYSTEM LED
Blinking
READY LED
ON
zone 1 LED
ON/OFF, according to the PGM1 status
zone 2 LED
ON/OFF, according to the PGM2 status
zone 3 LED
ON/OFF, according to the PGM3 status
zone 4 LED
ON/OFF, according to the PGM4 status
zone 5 LED
ON/OFF, according to the PGM5 status
zone 6 LED
ON/OFF, according to the PGM6 status
zone 7 LED
ON/OFF, according to the PGM7 status
zone 8 LED
ON/OFF, according to the PGM8 status
zone 9 LED
ON/OFF, according to the guardian round status
1. PGM1 to PGM8 status
can be maintained as it was previously established
,
by [#] key pressing.
2. In order to activate/deactivate PGM1
(defined as “mono-stable”, “bi-stable” or “clock timer” types), the user should
press the [1] key and the zone 1 LED will turn ON/OFF.
If the zone 1 LED is ON means PGM1 is activated and, if the zone LED is
OFF means PGM1 is deactivated. Any successful command of PGM1 activation/deactivation is followed by an automatic exit
from menu after about 1 second, like after [#] key pressing after 1 sec.
3. In order to activate/deactivate PGM2
(defined as “mono-stable”, “bi-stable” or “clock timer” types), the user should
press the [2] key and the zone 2 LED will turn ON/OFF.
If the zone 2 LED is ON means PGM2 is activated and, if the zone LED is
OFF means PGM2 is deactivated. Any successful command of PGM2 activation/deactivation is followed by an automatic exit
from menu after about 1 second, like after [#] key pressing after 1 sec.
4. In order to activate/deactivate PGM3
(defined as “mono-stable”, “bi-stable” or “clock timer” types), the user should
press the [3] key and the zone 3 LED will turn ON/OFF.
If the zone 3 LED is ON means PGM3 is activated and, if the zone LED is
OFF means PGM3 is deactivated. Any successful command of PGM3 activation/deactivation is followed by an automatic exit
from menu after about 1 second, like after [#] key pressing after 1 sec.
5. In order to activate/deactivate PGM4
(defined as “mono-stable”, “bi-stable” or “clock timer” types), the user should
press the [4] key and the zone 4 LED will turn ON/OFF.
If the zone 4 LED is ON means PGM4 is activated and, if the zone LED is
OFF means PGM4 is deactivated. Any successful command of PGM4 activation/deactivation is followed by an automatic exit
from menu after about 1 second, like after [#] key pressing after 1 sec.
6. In order to activate/deactivate PGM5
(defined as “mono-stable”, “bi-stable” or “clock timer” types), the user should
press the [5] key and the zone 5 LED will turn ON/OFF.
If the zone 5 LED is ON means PGM5 is activated and, if the zone LED is
OFF means PGM5 is deactivated. Any successful command of PGM5 activation/deactivation is followed by an automatic exit
from menu after about 1 second, like after [#] key pressing after 1 sec.
7. In order to activate/deactivate PGM6
(defined as “mono-stable”, “bi-stable” or “clock timer” types), the user should
press the [6] key and the zone 6 LED will turn ON/OFF.
If the zone 6 LED is ON means PGM6 is activated and, if the zone LED is
OFF means PGM6 is deactivated. Any successful command of PGM6 activation/deactivation is followed by an automatic exit
from menu after about 1 second, like after [#] key pressing after 1 sec.
8.
In order to activate/deactivate PGM7
(defined as “mono-stable”, “bi-stable” or “clock timer” types), the user should
press the [7] key and the zone 7 LED will turn ON/OFF.
If the zone 7 LED is ON means PGM7 is activated and, if the zone LED is
OFF means PGM7 is deactivated. Any successful command of PGM7 activation/deactivation is followed by an automatic exit
from menu after about 1 second, like after [#] key pressing after 1 sec.