SATA SATAjet 3000 B RP, Operating Instructions Manual

Page: 409 / 426

Operating Instructions SATAminijet 3000 B HVLP, minijet 3000 B T HVLP Operating Instructions SATAminijet 3000 B HVLP, minijet 3000 B T HVLP
409
US
7.3. Adjustment of the Spray Fan Pattern
• Adjust flat fan (factory setting) [5-1] .
• Adjust round fan [5-2] .
7.4. Painting
Fully pull trigger for painting [6-1] . Operate spray gun according to [6-2] .
Maintain spray distance as described in chapter 2.
8. Cleaning of the Spray Gun
Warning! Attention!
• Prior to cleaning, please disconnect the spray gun from the com-
pressed air circuit!
• Risk of injury due to unexpected leakage of compressed air or mate-
rial!
• Empty spray gun and gravity flow cup completely, dispose of paint
material appropriately!
• Disassemble and install components very carefully! Exclusively use
included special tools!
• Use neutral cleaning solution (pH value 6 to 8)!*
• Do not use acids, alkalines, bases, pickling agents, unsuit-
able regenerates or other aggressive cleaning solutions!*
• Do not soak spray gun in cleaning solution!*
• Do not clean cover plate of the electronic pressure display with
pointed, sharp or rough objects!
• Drillings must be cleaned with SATA cleaning brushes or SATA nozzle
cleaning needles only. The use of other tools may cause damage or
may affect the spray pattern. Recommended accessory : cleaning kit
Art. No. 64030 .
• Exclusively use spray gun washing machines recommended by SATA!
Please observe the operating instructions!
• The air passages have to be set under pressure with clean compressed
air during the entire cleaning process!
• Nozzle head has to point downwards!
• Remove the spray gun from the gun washing machine imme-
diately after the cleaning process!*