SATA graph 2, Operating Instructions Manual

Page: 14 / 28

Operating Instructions SATAgraph 2
Unscrew handle end piece (14), loosen paint needle lock nut (13) and pull out
paint needle (8) toward the rear.
Unscrew paint spray gun head (3) from gun body (2).
Prior to assembly, the O-ring located between the gun head (3) and the gun
body (2) should be lubricated or replaced if damaged.
Assembly must be performed exactly in reverse.
(a spare O-ring for the gun head is attached to the spring sleeve (11)
Never use force. Using improper tools such as pipe wrench, gas torch, etc. will void any warranty.
In many cases proper repairs can only be carried out with the aid of special tools. In such cases,
limit yourself to establishing the cause of the problem and leave the repairs to the service depart-
ment. We refuse to accept liability for perfect functioning of the spray gun if it is disassembled by
the customer.
a) Clean airbrush paint spray gun during every color change.
b) Flush paint spray gun with water, airbrush cleaner or corresponding solvent. With
paints and lacquers having a high pigment content paint and lacquer remainders
quickly deposit on the needle and around the needle cap.
c) After finishing the work, thorough cleaning of the parts in contact with lacquer and
paint is required.
d) If possible, the integrated air piston unit (8) should not be dismantled.
Occasionally grease lever mechanism and needle in the area of the lever
mechanism with a thin layer of silicone-free gun grease (Order No. 48173).
Do not grease the needle tip and the area of air cap and paint nozzle!
Important Notice:
Gun may be cleaned with solvent or cleaning agents manually or in a conventional gun
washing machine.
The following actions damage the gun/system, may lead to the loss of the explosion-
proofness approval and entirely annull any warranty claims:
- Immersing the gun in solvent or cleaning agents, or for a period longer than required
for the cleaning process as such
- Storing the gun inside the gun washing machine
- Cleaning the gun by means of ultrasound cleaning systems
6. Cleaning and Maintenance
5. Removing the Paint Spray Gun Head
3
II.5