SATA graph 2, Operating Instructions Manual

Page: 15 / 28

Operating Instructions SATAgraph 2
7. Spare parts (see spare part drawing at the end of this booklet)
•
Pos. No. Part.No. Description
31476 Nozzle set SATAgraph 2
32276 Repair kit
* 138909 “O” ring kit for paint nozzle (pack of 10)
1 36020 Trigger
4
31781 Gravity flow cup 4 ml with lid
4a 32029 Pack with 3 lids for gravity flow cup 4 ml
5 35964 Needle cap SATAgraph 2
9 32615 Pack with 3 coupling nipples and sealings
134791 Tissue hose, cpl. 2.5 m
14 33001 Handle end piece
15 33019 15 ml glass cup with lid and suction pipe
15a 33092 Pack of 5 - 15 ml glass cups with 5 lids, and 1 lid with suction pipe
6. Possible failures in operation
Trouble Cause Repair
1. Gun leaks Foreign substances between
fluid tip and needle prevent
sealing
Remove and clean fluid need-
le and fluid nozzle or install
new nozzle set. Correct paint
needle adjustment.
2. Spray pattern is bad Soiling and wear of parts Clean paint nozzle, paint
needle or air cap. Replace
parts.
3.
Paint spray flutters
4. Material bubbles or
„boils“ in paint cup
Leakage at the nozzle sealing
- Too little material in cup
- Fluid nozzle not tight self-
adjusting
- Refill material
- Tighten parts
- Clean sealing surface at
sealing and body
- Tighten air cap a little more
strongly
- Replace parts
english
II.6