![background image](http://html1.mh-extra.com/html/sata/97813a/97813a_user-manual_1200067013.webp)
中文
EN
DE RU KO PT
JA
ES
97813A
13
3
)
Select a jack of appropriate deadweight tonnage based on the weight of the vehicle.
4
)
Overloading of the jack is prohibited, otherwise the liability for accidents will not be covered by insurance.
5
)
Unbalanced loading is prohibited and it is not allowed to lift the vehicle in a tilting manner, otherwise it will be dangerous and the
jack and the vehicle may be damaged.
6
)
Brake the vehicle and shut off the engine before operation.
7
)
Confirm that the support surface is hard and level before operation, otherwise there may be danger.
8
)
The jack can only be used for jacking and cannot be used for supporting, and a matching jack support must be used to support the
vehicle immediately after jacking.
9
)
The jack tray must be carefully aligned with the support point on the vehicle chassis first, and the vehicle can be raised with the
jack.
10
)
The handle shall not be turned during the jacking, otherwise the oil return valve will be unscrewed, resulting in lowering of jack tray.
11
)
The vehicle shall not be moved during operation.
12
)
For lowering of the jack, the handle must be turned counterclockwise slowly to lower the vehicle slowly.
13
)
Do not work on, under or around the vehicle supported only with the jack.
14
)
Do not disassemble or refit the jack by yourself.
15
)
The safety valve cannot be adjusted by the user, otherwise the liability for accidents will not be covered by insurance.
16
)
The operator must wear goggles and working gloves conforming to relevant national safety regulations during operation.
Chapter II Product illustration
Note: The oil pump of the product is filled with 15# mechanical oil at delivery. It is recommended to use 10# aircraft hydraulic oil if the
product is often used below 0
℃
. During change, please discharge all the 15# mechanical oil out from the oil pump, and then add
the 10# aircraft hydraulic oil. For specific operation, please refer to page 4.
Rubber tray
Handle
Dual hydraulic pump
Fig. 1
pump Universal joint
Safety valve screw
(
Do
not unscrew it for pressure
regulation by yourself
)
Oil filler screw
Hydraulic
Fig.2
Summary of Contents for 97813A
