![background image](http://html1.mh-extra.com/html/sata/97813/97813_user-manual_1200066017.webp)
中文
EN
DE RU KO PT
JA
ES
97813/97817/97818
17
This jack is covered by product liability insurance:
This jack complies with the latest version of ASME PALD-2014.
I. Safety precautions:
1
)
Before operation and use, be sure to carefully read and fully understand all the contents of these instructions. Incorrect operation
may result in personal injury or product damage.
2
)
Check the jack before each use. Do not use it in case of any loosened or damaged parts.
3
)
Select the jack with the proper loading capacity
(
tonnage
)
according to the gross vehicle weight.
4
)
Never use the jack in an overloaded state, or else any losses caused by an accident will not be covered by the insurance.
5
)
Unbalanced loading is not allowed. Never tilt a jacked vehicle as this is likely to result in safety hazards and cause damage to the
jack and vehicle.
6
)
Brake the vehicle and stop the engine before operation.
7
)
Always confirm that the support surface is a horizontal hard surface before operation so as to avoid potential hazards.
8
)
The jack can only be used for jacking and cannot be used for supporting. After jacking, matching jacks shall immediately be used to
support the vehicle.
9
)
The jack tray shall be carefully aligned with the supporting point of the vehicle chassis before jacking.
10
)
Never rotate the handle during jacking, as this will cause the oil return valve to become loosened and the supporting tray to fall.
11
)
Do not move the vehicle during operation.
12
)
During unloading and lowering, slowly rotate the handle counterclockwise to lower down the vehicle.
13
)
Do not work under or around a vehicle which is only supported by a jack.
14
)
Do not disassemble or modify the jack without permission.
15
)
Never adjust the safety valve without permission, or else any losses caused by an accident will not be covered by the insurance.
16
)
During operation, the operator shall wear safety goggles and working gloves conforming to the relevant national safety regulations.
II. Product diagrams:
Figure 1
Tray
Lifting arm
Oil filler screw
(
not shown
)
Universal joint
(
not shown
)
Hydraulic pump
Rear wheel
Handle
Handle hole
Summary of Contents for 97813
