34
Thermostat connection and receiver and communication test
The units of the transmitter (thermostat or room unit) and the receiver are connected (paired) by default. If not, follow
these steps:
1. Read the receiver's instructions for connecting / pairing.
Quick summary: Turn off the receiver with the key so that
the red LED no longer lights up. Then hold down the key for 3 seconds to turn on the yellow LED. Release the key)
2. Turn off the thermo
stat so that nothing is displayed on the screen. When the receiver is ready for mating (step 1, or
as instructed by the receivers manual), hold down "
-
" and
key for 3 seconds. The screen will show "
-
".
3. The devices should now be paired and paired. "1"
should appear on the screen for a short time to confirm the
process is completed correctly.
The connection process is complete. If the process was unsuccessful, repeat the process from the beginning or get
help on our website, youtube channel or contact us
at help@sen
-controls.eu.