25
Important notes before first use, installation and maintenance
Be
fore use, carefully read the manual not only for the thermostat, but also for the Heating device (heat pump, pumps, boilers,
etc.) • Turn off the power supply before installing the thermostat! • We recommend that the installation is done by a qualifi
ed
ele
ctrician • the electrical circuit must be secured with a fuse that does not exceed the current load of wiring • Please note a
ll
safety instructions before installing • Do not expose the product to direct sunlight, extreme cold, humidity and sudden tempe
rature
changes. This would reduce the accuracy of the temperature measurement • Do not place the product in places that are prone to
vibrations and shocks
-
this can cause damage • Do not expose the product to excessive pressure, shock, dust, high temperature
s
or moisture, as these can cause damage to one of the functions product, shorter energy endurance, damage to batteries, and
deformation of plastic parts. • Do not expose the product to rain or moisture, dripping or spraying water. • Do not place any
sources
of fire on the product, for example, spark plugs etc. • Do not place the product in places where there is insufficient air ci
rculation.
• Do not insert any objects into the ventilation openings. • Do not interfere with the internal electrical wiring of the product. It may
be damaged and therefore terminate the warranty. The product must only be repaired by a trained specialist. • Use a moderatel
y
moistened cloth for cleaning. Do not use solutions or cleaning products - may damage plastic parts and electr
ical wiring • Do not
immerse the product in water or other liquids. • Do not repair it yourself if the product is damaged or defective. Put it in
the repair
shop where you bought it • The product should not be used by a person (including children) by physical, sensory or mental
disability or lack of experience and knowledge impeded by the safe use of the device if they are not controlled, or if they w
ere not
informed by the person responsible for their safety about the use of the device • Children's control
is necessary to ensure that
they do not play with the device.
Declaration of conformity has been issued for the product. The device can be freely used in the EU. This and other
documentation (RoHS, CE, …) is freely available on the website
www.sen-controls.eu and or subsites e.g. en.sen-
controls.eu under tab “Pravno”, “Dokumenti “Legal, Documents” or similar at each published product.
. Manufacturer of this
product is SASWELL CONTROLS (HONGKONG) LTD. Importer, distributor and service for Saswell is Sen Controls
d.o.o., Belokranjska cesta 29, 8340 Črnomelj, Slovenia