Touch
A
to zero the balance. Place
your first sample on the balance and
press
v
to save the reading in
the memory.
Select the desired settings and confirm
these by touching the checkmark. Then
touch
w
on the next screen display.
3
3
3
Remove the first sample from the
balance. Now the display will change
to 0.
Immerse your sample in the sample
holder in the beaker filled with your
reference liquid; then touch
v
.
4
4
4
To weigh-in further samples, proceed
in the same manner. Touch
n
to
display the results.
You will now see your results
as a report.
The balance will now show you the
calculated density of your solid sample.
The result will be displayed with a triangle
(= calculated value).
5
6
5
6
5
6
This number has been factory-set to five
measurements. You can enter a different
number by touching the three dots.
For example, press 1 and 5 to enter 15
measurements and touch the checkmark
to confirm this number.
Place your sample or an animal on the
pan and press
w
to begin weighing
under unstable conditions.
The averaged result will be displayed
with a triangle (= calculated value).
Place your sample on the upper pan of
the density kit to view its weight in air
and press
v
.