Getting Started
44 Arium
®
Smart Station Operating Instructions
6.1.4 For “Pure” Version: Connecting Dispense Tube of the
Hand-held Part
Procedure
t
Connect the blue marked inlet water tube of the hand-held part to the
identically marked connector (1).
6.1.5 For “Ultrapure” Version: Connecting Dispense Tubes of
the Hand-held Part
Procedure
t
Connect the colored marked inlet and outlet water tubes of the hand-
held part to the identically marked connectors (1).
6.1.6 Leak Test
Procedure
t
NOTICE
Water leakage in tubes or tube connections! If the tube is
deformed or is not inserted deep enough: Water may leak out. The
integrated dispensing valve opens when there is excess pressure (for
values for a necessary test, see Chapter “14.6 Device Functions”,
page 70). After commissioning, check the tube connections for
tightness of the external water connections.
6.1.7
Connecting the Hand-held Part
Procedure
t
Connect the hand-held part data cable (2) to the connector (1) on the
control unit.
1
1
1
1
2
