Getting Started
Arium
®
Smart Station Operating Instructions
41
Configuring Connection Tube 1
Required tools: Tubing release tool
Procedure
t
Loosen the unmarked angle joint (1) using the tubing release tool and
remove.
Configuring Connection Tube 2
Required tools: Tubing release tool, scissors
Procedure
t
On the straight connector (2), cut open the two black safety clips (3) on
the side using the scissors and remove from the connection.
t
Loosen the short tubing section (1) from the straight connector (2) using
the tubing release tool and remove.
t
Loosen the straight connector (2) using the tubing release tool and
remove.
t
Apply the angle joint removed from connection tube 1 in the place of the
straight connector.
Connecting Water Treatment Device to Dispensing Unit 1
Procedure
t
Connect the black marked inlet water tube of connection tube 1 to the
“Inlet” connection (1) of dispensing unit 1.
t
Connect the tube end with a black safety clip to the black marked water
connection (inlet) of the Arium
®
water treatment device.
t
Connect the return tube in this first protective tubing to the unmarked
water connection (return) (1) of the Arium
®
water treatment device.
1
3
1
2
1
1
