18
Select the cooking end time function and set the required duration with +/- button. “A” and cookpot symbol will appear. The relay
output becomes active. If time of day = cooking end time the relay output and the cookpot symbol are switched off.
The audible signal sounds and “A” blinks.
Fully automatic operation
Select the cooking duration function and set the required duration with +/- button. The “A” symbol appears. The relay is switched
on and the cookpot symbol appears. Select the cooking end time function and the earliest possible end time is displayed. Set
the required end time with the +/- buttons. The relay and the cookpot symbol are switched off.
The cookpot symbol appears again when time of day = the calculated start time.
After the automatic programme has ended, the symbol “A” blinks.
The audible signal is heard and the cook pot symbol and the relay are switched off.
Minute minder
Select the minute minder button and set required time with the +/- buttons. As the time set elapses the bell symbol is displayed.
After the time set has elapsed, the audible signal sounds.
Audible signal
The audible signal sounds at the end of a minute minder cycle or of a cooking programme for a period of 7 minutes. The signal
can be cancelled by pressing any function button. Pressing the “-“ button without having previously selected a function the
frequency of the signal changes. A selection from 3 possibilities can be made. The selected signal is audible as long as the time
the “-“button is pressed.
Programme start and verification
A programme which has been set is carried out after setting the time required. The “time to run” can be verified at any time by
selecting the appropriate function.
Setting error identification
The setting is correct if the time of day is in between the calculated cooking start and end times. If an error has been made, this
will be indicated by the audible signal and by the symbol “A” flashing. The faulty setting can be corrected by changing one or
both functions.
Cancelling programme
A programme can be cancelled by selecting the manual function. After a programme which has been set comes to an end, it is
automatically cancelled.
USING THE
3 KEYS ELECTRONIC PROGRAMMER
(Fig.57)
The first start up
The numbers and the A letter on the display are blinking when the oven is switched on for the first time, or after a
power cut: the appliance cannot be operated in this condition
.
To set the hour and/or to enable the appliance to operate press the M key for at least 2 seconds
:
the A letter turns off
and the numbers now are steady on the display.
The dot (3) starts blinking
:
press the - or + key to set the hour
.
The hour is accepted by the programmer just few second after having released the key.
N.B. the appliance can be correctly used for coking only when you will see on the display the symbol (2).
The symbols on the display:
1
A*
Automatic programmer is working
.
(* in some models there is the writinq 'Auto' instead of A).
2
The appliance
i
s ready for manual use (not automatic).
3
•
When blinking, the programmer is in setting hour mode
.
4
Timer set
.
5
-
Decreasing numbers when setting the timer.
Also for choose your desired sound level ( 3 levels available)
.
6
M
"Mode" kev to access the programming options of the programme
.
7
+
Increasing numbers when setting the timer.
Timer
The purpose of the timer is just of a sound signal, which can be set for a max time of 23h59min
.
once elapsed the set
time, th
e
(4) symbol turns off and a sound signal is heard
;
this sound set off automatically in 7min, or you can stop it
by pressing any key of the programmer
.
To set the timer press the M key for 2 seconds, or anyway just to see the (4)
symbol blinking. Set the timer by using the + or - keys. Release the + or - key when you have matched your des
i
red
tim
e
. In a few seconds the current time appears on the disp
l
ay together with the ) symbol
.
The countdown
s
tarts
i
mmediately from now on.
Semi-automatic cooking
Cooking time
:
Once having selected a coking function and set the desired temperature, press the M key for a 2
seconds time to access the programming mode. The (4) symbo
l
appears. Release and press again the M key. On the
display, the A symbol starts blinking and the " dur " writing appears on the display, then it changes to O' 00
.
Set the
cooking time with the - or + keys. (max available time: 10h)
.
The selected time is automatically processed by the
programmer in a few seconds, or you can also touch the M key many times just to see again the current time
.
The A and (2) symbols will be on the display
.
Once the set cooking time is finished, a sound will be heard and the
oven automatically switches off
.
Please see the fo
l
lowing paragraphs about how to disable the sound alarm and
restarting the oven
.
End of cooking
once having selected a cooking function and set the desired temperature, touch the M key to access the
Summary of Contents for TS95C61LNE
