8
DA127/DA270/DA388 Models use side anti-dew tube and Independent cooling system.
TURNING ON YOUR SEEAK AGER
Plug in and switch on the cellar by pressing on the power button
for a few seconds.
When you use the Steak Ager for the first time (or restart the Steak Ager after having it shut
off for a long time), there will be a few degrees variance between the temperature you have
selected and the one indicated on the LED readout. This is normal and it is due to the length
of the activation time. Once the Steak Ager is running for a few hours everything will
stabilize.
Important: If the unit is unplugged, power is lost, or turned off, wait 3 to 5 minutes before
restarting the unit. The Steak Ager will not start if you attempt to restart before this time
delay.
Operating Noises
To reach the desired temperature settings, Our Steak Ager, like all Steak Ager operating with
compressors and fans, may produce the following types of noises. These noises are normal
and may occur as follows:
- Gurgling sound - caused by the refrigerant flowing through the appliance’s coils.
- Cracking/popping sounds - resulting from the contraction and expansion of the refrigerant
gas to produce cold.
- Fan operating sound - to circulate the air within the Steak Ager.
An individual’s perception of noise is directly linked to the environment in which the Steak
Ager is located, as well the specific type of models. Our Steak Ager are in line with
international standards for such appliance. We will always do its utmost to satisfy its