saro 213-7105 Instruction Manual Download Page 8

6

Stand 10/2018 TM

• 

Vergewissern Sie sich, dass das Stromkabel frei von 

Beschädigungen ist.

• 

Ein beschädigtes Gerät darf nicht benutzt werden! In 

diesem Falle wenden Sie sich an Ihren Fachhändler!

• 

Vor dem Anschluss ans Netz prüfen Sie, ob die Stromart 

und die Netzspannung mit den Angaben auf dem 

Typenschild des Gerätes übereinstimmen.

• 

Lassen Sie den Anschluss ggf. von einem Fachmann 

übernehmen.

• 

Verwenden Sie keine Adapter oder 

Verlängerungskabel.

• 

Make sure that the power cable is free of damage.

• 

A damaged device must not be used! In this case, 

contact your specialist dealer!

• 

Before connecting the device to the mains, check that 

the type of current and the mains voltage correspond 

to the information on the type plate of the device.

• 

If necessary, have the connection carried out by a 

specialist.

• 

Do not use adapters or extension cords.

WARNUNG: GEFAHR DURCH ELEK-

TRISCHEN STROM!

WARNING: DANGER FROM ELECTRIC  

CURRENT!

ANSCHLUSS

Bevor Sie das Gerät anschließen, vergewissern Sie sich, dass 

die Spannung und die Frequenz der Stromversorgung mit 

den Angaben auf dem Typenschild übereinstimmen! 

Verfügt das Gerät über einen Netzstecker Anschluss, stecken 

Sie den Netzstecker in eine geeignete, geerdete Steckdose.

Sollte das Gerät nicht über einem Netzstecker Anschluss 

verfügen, lassen Sie die Installation unbedingt

von einem Fachmann vornehmen!

CONNECTION

Before connecting the device, make sure that the voltage 

and frequency of the power supply correspond to the 

specifications on the type plate!

If the device has a mains plug connection, plug the mains 

plug into a suitable, earthed socket.

If the device does not have a mains plug connection, it is 

imperative that you leave the installation unattended.

by an expert!

WARNUNG: BRANDGEFAHR!

WARNING: FIRE DANGER!

• 

Platzieren Sie das Gerät nicht in der Nähe von 

entzündlichen Materialien oder Flüssigkeiten! 

Zu allen Seiten muss ein ausreichender Abstand 

eingehalten werden!

• 

Do not place the device near flammable materials or 

liquids! A sufficient distance must be maintained to all 

sides!

Summary of Contents for 213-7105
















Reviews: