background image

FCC Caution: 

 

This device complies with part 15 of the FCC Rules. Operation is subject to the following 

two conditions: (1) This device may not cause harmful interference, and (2) this device 

must accept any interference received, including interference that may cause undesired 

operation.   

Any Changes or modifications not expressly approved by the party responsible for 

compliance could void the user's authority to operate the equipment. 

 

IMPORTANT NOTE:     

Note: This equipment has been tested and found to comply with the limits for a Class B digital 

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable 

protection against harmful interference in a residential installation. This equipment generates, 

uses and can radiate radio frequency energy and, if not installed and used in accordance with 

the instructions, may cause harmful interference to radio communications. However, there is 

no guarantee that interference will not occur in a particular installation. If this equipment does 

cause harmful interference to radio or television reception, which can be determined by turning 

the equipment off and on, the user is encouraged to try to correct the interference by one or 

more of the following measures:     

 

—Reorient or relocate the receiving antenna.     

 

—Increase the separation between the equipment and receiver.     

 

—Connect the equipment into an outlet on a circuit different from that to which the receiver is 

connected.   

 

—Consult the dealer or an experienced radio/TV technician for help.   

   

 

FCC Radiation Exposure Statement:   

 

The device has been evaluated to meet general RF exposure equirement. The device 

can be used in portable exposure ondition without restriction.

 

This device for License use only. 

Summary of Contents for RX9S















Reviews: