10
IR Match.
Set to match with the receiver. The
screen will display "Matching" when in process.
After successful matching, it will indicate "Match
success."
Set Backlight.
Select ON or Delay 10 / 30 /60
seconds. Default is "Delay 30s."
Restore default setting.
Version of the UwMic9S TX9S.
Operation Guide
1. Connect the receiver to the mic jack of a
camera, camcorder or mixer with the supplied
cable.
2. Turn on the receiver by long pressing the
power button.
3. Set the channel of the receiver by two ways:
①
Using the auto scan function
Use the + or – button to display the auto scan
screen on the receiver.
Long press the SET button to select “Auto scan?”
Press the SET button to confirm.
A
B
The channel with the least noise and interference
will be displayed.
A. Indicates the current least noise channel is
CH 03 and ask you if you would like to use it.
You can short press the SET button to confirm
the channel within 20 seconds or long press the
SET button to exit the displayed menu without
saving.
