11
B. Counting down 20 second
Note:
①
After 20 seconds have elapsed, the display
returns to the home screen without saving.
②
Some noise may occur when power is
turned on, you could turn down the audio
input level of devices connected to the
receiver accordingly.
②
Manually setting the receiver channel.
Use the + or – button to display the channel
menu on the receiver.
Long press the SET button to select the menu.
Use the + or – button to select the desired
channel and confirm it by short pressing the SET
button.
4. Match the channel of receiver and transmitter.
①
Using infrared transmission to transfer the
frequency set on the receiver to a transmitter.
For the TX9S
• Turn on the transmitter and receiver.
• Use the + or – button to display the “Match
with TX” menu on receiver.
• Use the + or – button to display the "Match
with RX" menu on transmitter.
• Both long press the SET button to select the
menu and short press it to confirm.
• Place the infrared transmitter port on the
receiver near the infrared detector on the
transmitter.
• If "Match success" displayed on the OLED
screen, the frequency for use on the
transmitter is set.
• After matching successfully, press the SET
button of receiver to return to the previous
menu.
