~ 24 ~
Device power-up delay
Maximum time the device will take before it properly reports itself to the Host
controller. ‘Auto’ uses default values; for a Root port it is 100ms, for a Hub port
the delay is taken from Hub descriptor.
Options: Auto, Manual.
Super IO Configuration
Restore on AC Power Loss
Enables your computer to automatically restart or return to its last operating
status after power returns from a power failure.
Options: Always off, Always on, Last State.
EuP Function
Enables the EuP (Energy Using Products) function, allows BIOS to switch off
some power at S5 state to get system ready for the EuP requirement to reduce
power consumption.
Options: Enabled, Disabled.
Aptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc.
Advanced
Super IO Configuration
Super IO Chip
Fintek F71808
Restore on AC Power Loss
[Always Off]
EuP Function
[Disabled]
Version 2.10.1208. Copyright (C) 2010 American Megatrends, Inc.
ÆÅ
: Select
Screen
:
Select Item
Enter: Select
+/-: Change
Opt.
F1: General
Help
F2: Previous
Values
F3: Optimized Defaults
F4: Save
and
Exit
ESC: Exit