background image

370PMA Series Quick Installation Chart

For your convenience, this chart lists all the CPUs supported by 370PMA Series and their corresponding
jumper setting.

The Ratio of some latest CPUs are fixed by Intel and VIA such as Celeron/ Celeron-II/ Pentium-III 366, 400,
566... etc and VIA Cyrix III CPU. 

You can ignore the four jumpers if you have this CPU on board and it

will be auto detected by motherboard

. Please check with the CPU manufacturer or vendor for the CPU

Ratio information.

Ratio

JF0

JF1

JF2

JF3

3.0x

1-2

2-3

1-2

1-2

3.5x

1-2

2-3

2-3

1-2

4.0x

2-3

1-2

1-2

1-2

4.5x

2-3

1-2

2-3

1-2

5.0x

2-3

2-3

1-2

1-2

5.5x

2-3

2-3

2-3

1-2

6.0x

1-2

1-2

1-2

2-3

6.5x

1-2

1-2

2-3

2-3

7.0x

1-2

2-3

1-2

2-3

7.5x

1-2

2-3

2-3

2-3

8.0x

2-3

1-2

1-2

2-3

 

370PMA Series

Motherboard

User's Manual

Product Name:       370PMA, 370PMA-L, 370PMA-H or 370PMA-LH

Manual Revision:   English,  1.3

Trademarks

Intel, Celeron, Socket 370 and Pentium III are trademarks of Intel Corporation

VIA is a registered trademark of VIA Technologies, Incorporated

S3, Savage4 are trademarks of S3 Incorporated

Award is a trademark of Award Software International Inc.

MS-DOS, Windows 95, Windows 98, Windows 2000 and Windows NT are registered trademarks of
Microsoft Corporation

Novell is a trademark of Novell Corporation

All other brand and product names are trademarks or registered trademarks of their respective
companies.

Summary of Contents for 370PMA Series
































Reviews: