5
3C
6
4
7
14
The Sapling Company, Inc.
1633 Republic Road
Huntingdon Valley, PA 19006
USA
P. (+1) 215.322.6063
F. (+1) 215.322.8498
www.sapling-inc.com
Wall Mount Installation - Round SlimLine Clock
6) Use the gray wheel on the movement to set
the hour and minute hands. Rotate the wheel
clockwise for an earlier time, or counterclockwise
for a later time.
3C) Insert the wall anchors into the two holes,
then place the two self tapping screws through the
mounting piece and into the wall anchors. Skip step
4 and go directly to step 5.
4) Place the mounting piece on the wall above the
gang box so that the bottom centered hole on the
piece overlaps the top hole on the gang box. Insert
a #6-32x1 screw through the bottom centered hole
and into the top hole of the gang box.
5) Temporarily attach the clock to the mounting
piece (see step 11), use the pencil to mark the
location of the hole at the top of the release lever,
and remove the clock again (see step 13). Remove
the mounting piece and make a hole at the location
you just marked with the 1/8 inch drill bit. When
finished, reattach the mounting piece.
7) Insert the AA Battery into the battery slot on the
movement. The clock will start to function.
