7
9
8
10
19
The Sapling Company, Inc.
1633 Republic Road
Huntingdon Valley, PA 19006
USA
P. (+1) 215.322.6063
F. (+1) 215.322.8498
www.sapling-inc.com
Wall Mount Installation - Square Clock
9) Use the gray wheel on the movement to set
the hour and minute hands. Rotate the wheel
clockwise for an earlier time, or counterclockwise
for a later time.
10) Insert the AA Battery into the battery slot on
the movement. The clock will start to function.
7) Slide the clock housing onto the mounting piece.
If the housing does not slide on properly, tighten
the screws that attach the mounting piece to the
gang box or wall anchors.
8) If you wish to prevent the clock from sliding off
the mounting piece, use the small, silver 6-19x3/8
screw on the bottom centered hole. Once the screw
is in place, test it by attempting to slide the housing
up. The housing should not move.
