Sapido we 1110 User Manual Download Page 200

Page: 200 / 285

200

5.2.5

USB Disk Management Setup

Easy to check all the USB storage devices connected to your WE-1110, view the entire data

folder inside each storage devices, and you can do the disk formatting via click on the button

in this page.

Select the USB Disk and click on “

” button for refresh all disks before you do disk partition,

and the “

Unplug

” button will appear. To partition/format the disk, please select the disk and

click on “

Format

” button. Moreover, if you want to view the data inside the disk, please go to

“

5.2.7 FTP Sever Setup

” to enable FTP server and then click on “

Disk Explorer

” to view all

disks folder inside the device.

Notice: You have to click on “

Unplug

” button before remove the USB devices from WE-1110.

Summary of Contents for we 1110






























































































































































































































































































Search results

Summary of Contents for we 1110

Reviews:

Brands by name

Popular brands

Sapido we 1110, User Manual

Search results

Summary of Contents for we 1110

Reviews:

Brands by name

Popular brands