Sapido RB-1602 Page 37 User Manual Download

Page: 37 / 167

http://www.sapido.com.tw/ User Manual 1.0

If ISP provides you DNS information, please select Attain DNS automatically, otherwise

select Set DNS Manually and input the DNS information into the blank.

Clone MAC Address

Copy the MAC address from the device you had registered to your ISP if your ISP asks for

the specific MAC Address.

Enable IGMP Proxy

The Internet Group Management Protocol (IGMP) is a communication protocol used to

manage the membership of Internet Protocol multicast groups. IGMP is used by IP hosts and

adjacent multicast routers to establish multicast group memberships. You can choose to

enable IGMP Proxy to provide service.

Enable Ping Access on WAN

Select Enable Ping Access on WAN, will make WAN IP address response to any ping

request from Internet users. It is a common way for hacker to ping public WAN IP address, to

see is there any WAN IP address available.

Enable Web Server Access on WAN

This option is to enable Web Server Access function on WAN.

Apply Changes & Reset

Click on Apply Changes to save the setting data. Or you may click on Reset to clear all the

input data.

Summary of Contents for RB-1602








































































































































































Search results

Summary of Contents for RB-1602

Reviews:

Related manuals for RB-1602

Brands by name

Popular brands

Sapido RB-1602, User Manual

Search results

Summary of Contents for RB-1602

Reviews:

Related manuals for RB-1602

Brands by name

Popular brands