Sapido RB-1602 Page 100 User Manual Download

Page: 100 / 167

http://www.sapido.com.tw/ User Manual 1.0

100

6.2.4

Wireless Access Control

With the MAC address, you may allow or disallow the access to your AP.

Wireless Access Control Mode

“Allowed Listed” means only the MAC address listed on the allowed list can access to your

wireless network.

“Deny Listed” means the listed MAC Address are not allowed to link to your wireless

network.

“Disable” for function disuse.

MAC Address

Please input the allowed or denied MAC address, for example, 001122334455.

Comment

You may input the comments for the set MAC Address.

Apply Changes & Reset

Click on “Apply Change” to save the setting data. Or you may click on “Reset” to clear all the

input data.

Current Access Control List

In this list, all the MAC info you input will be displayed.

Summary of Contents for RB-1602








































































































































































Search results

Summary of Contents for RB-1602

Reviews:

Related manuals for RB-1602

Brands by name

Popular brands

Sapido RB-1602, User Manual

Search results

Summary of Contents for RB-1602

Reviews:

Related manuals for RB-1602

Brands by name

Popular brands