Sapido RB-1602, User Manual

Page: 12 / 167

http://www.sapido.com.tw/ User Manual 1.0
12
Operation Mode
Switch
Router, AP, and WiFi AP operation modes
Reset Button
Press “Reset” button over 10 seconds. When status indicator turns from
flashing to solid, the process is completed. All settings are back to default.
Ethernet Port
2 RJ-45 Ethernet 10/100 Ports
1.2.2 LED Indicator Status Description
Status
LED Indicator
Solid Flashing
STATUS Operation OK Green: Reset / Firmware updates in progress
LAN RJ-45 Plugged in Transmitting Data
WAN RJ-45 Plugged in Transmitting Data
WIRELESS & WPS Operation OK
Green: Transmitting Data
Orange: WPS enabled
POWER Operation OK Power on
1.3 System Requirements
To begin with RB-1602, you must have the following minimum system requirements. If your
system can’t correspond to the following requirements, you might get some unknown troubles
on your system.
XDSL/Cable Modem and broadband Internet Account.
One Ethernet (10 BASE-T or 10/100 BASE-TX) network interface card.
CP/IP and at least one web browser software installed (E.g.: Internet Explorer 5.0,
Netscape Navigator 7.x, Apple Safari 2.03 or higher version).
At lease one 802.11g (54Mbps) or one 802.11b (11Mbps) wireless adapter for wireless
mobile clients.
Recommended OS: Windows / Linux/ Mac.