Sapido RB-1602 Page 123 User Manual Download

Page: 123 / 167

http://www.sapido.com.tw/ User Manual 1.0

123

IP Address

The default value of LAN IP address is 192.168.1.254 for this router.

Subnet Mask

Input Subnet Mask, normally it is 255.255.255.0.

Default Gateway

Input ISP Default Gateway Address. If you don’t know, please check with your ISP.

DHCP

Enable or disable DHCP services. The DHCP server will automatically allocate an unused IP

address from the IP address pool to the requesting computer if enabled.

DHCP Client Range

Define the DHCP client range and then the DHCP server will assign an IP to the requesting

computer from this range. The Show Client will display every assigned IP address, MAC

address, and expired time. The default range is 192.168.1.100 - 192.168.1.200.

Summary of Contents for RB-1602








































































































































































Search results

Summary of Contents for RB-1602

Reviews:

Related manuals for RB-1602

Brands by name

Popular brands

Sapido RB-1602, User Manual

Search results

Summary of Contents for RB-1602

Reviews:

Related manuals for RB-1602

Brands by name

Popular brands