Sapcon COAT-ENDURE, Instruction Manual

Page: 7 / 16

Coat-Endure User Manual & Datasheet V 3.0
5 Electrical Specifications
Please refer to Table 1 for Electrical Specifications.
PARAMETER VALUE
Input Power Supply 18 - 55V DC and 90 - 265V AC at 50Hz on same terminal
Available Output Options Relay SPDT , PNP - Single Point Switching
Power Consumption 1.5W at 24 V
Switching Indication Bi-color LED:
Red - Alarm
Green - Normal
Fail-safe Field Selectable
•
Open - Fail-safe High (For High Level)
•
Close - Fail-safe Low (For Low Level)
Time Delay Setting 1 - 25 seconds (For both, Covered and Uncovered Delays)
Relay Rating 6 Amps at 230V AC
Table 1: Electrical Specifications
6 Mechanical Specifications
Please refer to Table 2 for Mechanical Specifications.
PARAMETER VALUE
Housing
•
SCUTE: Pressure die-cast aluminium weatherproof
(Rating IP-68)
•
FP2C: Cast aluminium, weatherproof & flameproof,
powder coated, suitable for Gas Groups IIA, IIB & IIC
as per IS-2148
Electrical Connector 2 x 1/2” BSP/NPT , PG 13.5
Operating Temperature 0
◦
C to 60
◦
C (Electronics)
Process Temperature Up to
250
◦
C
Operating Pressure Up to 10 bar
Mounting
•
Screwed: 1/2",1”,1 1/2", 3/4” BSP / NPT
•
Flanged: As per user specification
Probe Length 65 mm and (85 mm to 1500 mm)
Insulation Part PTFE / Full PTFE
Table 2: Mechanical Specifications
Sapcon Instruments Pvt.Ltd.
R
7