Sanyo WXU700 - WXGA LCD Projector Owner'S Manual Download Page 21

Page: 21 / 154

Installed software

The following 3 softwares are installed on your computer.

●

Network Capture :

Captures the displayed image and the sound of the computer and serves them to the projector via
the network.

●

Network Viewer (File Converter 1):

Converts to the JPEG*

data format which can be projected with the projector from the JPEG, bitmap

and Power Point files.

●

Network Viewer (Program Editor) :

This is a tool to make the program which has a function to specify and order the projecting JPEG
image data stored in the file servers.

* To uninstall these software, use "Add/Remove Program" from the control panel.
*1 This product supports the JPEG image format. This file is needed to convert to the optimized JPEG file by using the

File Converter 1 software previously. Refer to the item "Creating the available data [Network Viewer 5]"(

p.114)

about data converting for the projection.

Installing the software

Summary of Contents for WXU700 - WXGA LCD Projector



























































































































































Search results

Summary of Contents for WXU700 - WXGA LCD Projector

Reviews:

Related manuals for WXU700 - WXGA LCD Projector

Brands by name

Popular brands

Sanyo WXU700 - WXGA LCD Projector, Owner'S Manual

Search results

Summary of Contents for WXU700 - WXGA LCD Projector

Reviews:

Related manuals for WXU700 - WXGA LCD Projector

Brands by name

Popular brands