Sanyo VPC-MZ3 Page 203 Instruction Manual Download

Page: 203 / 218

Problem

Cause

Action

Reference

page

Viewing

images

No image
appears on the
LCD monitor.

The camera is
connected to a
computer.

No image
appears on the
LCD monitor
while the
camera is
connected to a
computer.

166

During audio
playback, there
is no sound.

The volume
setting on the
digital camera is
too low.

Select the
volume icon

and adjust the
volume.

No voice memo
was recorded
with the image.

Select the add
voice memo
setting, and
speak into the
microphone.

135

When using the
Microdrive,
excess noise
was also
recorded.

The drive noise
for the
Microdrive was
also recorded.

Not a
malfunction.

—

A strange sound
is heard during
video clip
playback.

The sound of
the autofocus
motor was
recorded.

SX612/EX, GX, U (VPC-MZ3 GB2) Thu. Sept., 05/2002

English

200

Summary of Contents for VPC-MZ3



























































































































































































































Search results

Summary of Contents for VPC-MZ3

Reviews:

Related manuals for VPC-MZ3

Brands by name

Popular brands

Sanyo VPC-MZ3, Instruction Manual

Search results

Summary of Contents for VPC-MZ3

Reviews:

Related manuals for VPC-MZ3

Brands by name

Popular brands